0800 473 414
9a Lovell Court Albany, Auckland

Opening hours 8:30 to 5pm weekdays


Save 13%

Davey Cutter/Shredder Pumps

RRP: $2,471.75
(Including GST) You save: $322.40 (13%)

Davey Cutter/Shredder Pumps

High head single channel sewage handling submersible sump pumps with cutting impeller, available with a choice of single or three phase motors.


Model Flow Rate Pumping Height Inlet/Outlet Wattage Voltage/Phase Other 
D75KA 380 LPM 15meters head 2"- 50mm 0.75 KW 220-Single Fitted with Float switch
DT08K 380 LPM 15meters head 2"- 50mm 0.75 KW 415-Three No Float
DT15K 680 LPM 18meters head 3"- 75mm 1.5 KW 415-Three No Float
DT22K 980 LPM 21 meters head  3"- 75mm 2.2 KW 415-Three No Float
DT37K 1100 LPM 25 meters head 3"- 75mm 3.7 KW 415-Three No Float
DT55K 1500 LPM 23 meters head 4"-100mm 5.5 KW 415-Three No Float
DT75K 2150 LPM 33 meters head 4"-100mm 7.5 KW 415-Three No Float


*Corrosion resistant 304 stainless steel shaft, motor shell and fasteners
*Open impeller, single channel, centrifugal design with cutting leading edge
*Able to pump soft solids in suspension
*Less susceptible to blockage
*Capable of higher heads / pressure
*Able to cut string like materials, reducing the risk of blockage in pump or pipework
*Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side
*Automatic resetting thermal overload
*D75KA model fitted with automatic float switch with a present float length
*All units fitted with10m harmonized cable with bared ends-Easy connection to power supply 


*Sewage water pumping
*Sump emptying
*Septic effluent disposal
*Water transfer
*Pumping of light slurries and factory waste
*Pumping waste water with stringy or long soft solids in suspension

Suitable for: 

*Semi-screened sewage or “grey water” of neutral pH containing up to 20% small soft solids or 1% string like solids.
*Some wear should be expected while pumping hard solids in suspension
*Cutter pumps are not suitable for sanitary products - use Grinder model pumps. 

1 Year Warranty 

Brand :
Flow Rate (L/M) :
Maximum Head (M) :
Motor Size (kW) :

Brochure (Shredders.pdf, 622 Kb) [Download]

No posts found

Write a review