Q550B - Stainless Steel Submersible Vortex Pump - 550 Watt
Designed for use as a Dirty water pump, Drainage Pump or Clean water transfer pump. Pumps solids up to 35mm - great for pumping out footings!
* Power: 550 Watt
* Max Flow rate: 175 Litres per minute or 10500 Litres per hour
* Max delivery height: 7.5 metres
* Max immersion depth: 7 metres
* Foreign body size: Up to 35mm
* Max pressure: .75 bar
* Weight: 5.4 kg
* 345mm high
* 240mm wide (including outlet elbow adaptor)
* Temperature Range: 0-35 degrees
* Light Weight
* Easy to use
* Float switch for run-dry protection
* 10 Metre electrical cord
* 1 inch, 1.25 inches, stepped outlet hose fitting for 25mm & 38mm Hose
* Corrosion resistant stainless steel construction - including stainless steel shaft
* The external float lead is adjustable
* Cut in can be approx 350-450 mm and cut off approx 100mm
* 500 mm max is needed for float clearance.
The float switch automatically switches on the pump at a water height of approx 53cm and off at approx 15cm. By fixing the float switch cable to the float switch lock, the cut in/out height can be adjusted.
* Dirty water
* Calf Milk
Not suitable for ponds, fountains, sewage/effluent or biotreatment systems.
Pump is suitable for intermittent use only.
Pump is not suitable for permanant installation
12 months warranty