GRUNDFOS SCALA2 Booster Pump
Grundfos Scala2 is a robust, composite, variable speed pump that adjusts performance according to water demand, providing constant pressure to all taps. The fully integrated pump includes a motor, tank, sensor, drive and non-return valve in one compact unit that is quick and easy to install. SCALA2 is self-priming, allowing for use from both above and below ground water sources and the water-cooled motor ensures quiet operation.
*Power: 550 Watts
*Max Pumping Height: 45 meters max
*Max Pressure: 63 PSI (6 Bar)
*Max Flow Rate: 60 litres per minute
*8 meter suction lift
*47DB Noise level (volume of a modern dishwasher)
*Max Liquid Temperature: 45 Degrees
*Variable Speed:The pump adjusts performance according to water demand, providing constant pressure to all taps regardless of variations in demand or inlet pressure.
*Self-Priming:Ideal for pressurising water from above or below ground water sources with a suction lift of up to 8 metres and self-priming up to 4 metres.
*Energy Efficient:The pump features a permanent magnet motor to help reduce power consumption while the frequency controller matches the power consumption with the required water output, also helping to conserve energy and reduce energy bills.
*Simple Selection:One model to suit most domestic applications makes selection easy.
*User Friendly:The easy-to-use control panel features LED indicators displaying power status, pressure setting and alarm indicator lights.
*Protective Functions:To protect the pump and help ensure a long life, a range of protective features are incorporated into the pump such as; dry-run protection, anti-cycling alarm, auto-reset and maximum continuous operation time (30 mins).
*Easy Installation:Quick and easy installation in just three steps; connect the pipes, prime the pump and plug into the power outlet.
*Integrated Non-Return Valve:No additional non-return valve required - plug and pump solution.
SCALA2 incorporates integrated speed control enabling perfect water pressure at the taps, meaning that the pump performance will increase with increasing demand. SCALA2 can be installed in three easy steps:
1. Connect the pipes.
2. Prime the pump.
3. Plug the pump into the power outlet and the pump will start.
Grundfos SCALA2 has all the components necessary to ensure a comfortable pressure:
*Integrated speed-controlled drive
*Integrated non-return valve.
*Household water supply
*Pressure boosting from above ground rainwater or holding tanks
*Pressure boosting from below ground water sources - eg. below ground tank or dam
2 Year Warranty
No posts found