Watertech Pressflow

Save 29%

Price:
Sale price$127.00 Regular price$178.25

Description

Watertech Pressflow 

The Press Flow can be run with either 115 Vac or 230 Vac. It starts and stops the pump depending on opening and closing of the taps. The safety benefits include stopping the pump in case of a water shortage and dry run protection.

Features:

*High Quality Italian Design and Manufacturing
*Run Dry Protection
*Colour: Blue/Yellow
*A user-friendly interface with LED indicators displaying power status, power on and restart
*Wetted parts are made from high quality corrosion resistant materials
*1” (25mm) Inlet/Outlet 

Technical Features:

*Power: -115V- 0.55kW (0.75HP)
*230V- 1.1kW (1.5 HP)
*Max Current: 8A
*Max Operating Pressure: 16 Bar
*Single Phase-230
*Frequency: 50-60 Hz
*Protection Grade: IP65
*Max Temperature: 65°C
*Minimum Flow Rate-1 LPM

Operation:

The device must be mounted in a vertical position. In order to operate, the flowswitch requires a minimum flow that passes through it when a tap of the system is opened. For this reason the device and the system tap must be installed underneath the tank. It stops and starts the pump depending on the opening and closing of the system taps. It stops the motor and saves the pump in the case of a water shortage. To restore normal operation to the device and the system simply press the red “Restart” button. In case of a blackout, it will automatically rearm again several seconds after the electricity returns.

Control Panel:

Power on Green LED on Power On
Pump on Yellow LED on Pump On
Restart  Red Button Restarts the device and the system in case of failure 

Installation: 

The device can be installed directly on the pump or between the pump and the first tap. Make all the electrical connections, check that the pump is correctly primed, open a tap and energize. In order to operate it requires a minimum flow that passes through it when a tap of the system is opened. For this reason, the device and the system tap must be installed lower than the tank (Fig. 1 - Fig. 2-See Image Above). Starts and stops the pump depending on the opening and closing of the taps. In case of water shortage, the device stops the pump protecting it from dry running. In case of a temporary blackout, the device will automatically rearm once the electricity returns. This device can also be used for direct withdrawal from the water mains (Fig. 3-See Image Above)

 

For more information see brochure below (pages 44-45) 

Brochure

 

2 Year Warranty 



Features

  • Brand Watertech

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like