Watertech MasControl Automatic Controller

Save 16%

Price:
Sale price$240.00 Regular price$284.90

Description

Watertech MasControl Automatic Controller

TRE-MASCONTROL1P, TRE-MASCONTROL3P

The Watertech Mascontrol is an automatic device for control and protection of water pumps. The Mascontrol is available in either single or three phase. . The Controller will start and stop the pump depending on opening and closing of the taps and offers run dry protection. It comes equipped with automatic restart in case of failure and anti-jamming function. Ideal for above ground pumps and submersible pumps up to 3 HP.

Available in single phase model or three phase model (Please see dropdown menu) 

Features:

High Quality Italian Design and Manufacturing
* Run Dry Protection
* Colour: Blue/Yellow
* 1.5 Bar Cut In Pressure
* A user-friendly interface with LED indicators displaying power status, pump running and alarm indication.
* Automatic restart in case of failure and anti-jamming function.
* Wetted parts are made from high quality corrosion resistant materials
* 1”1/4 male connections to guarantee a higher flow rate 

Technical Features:

* Max Current: 6A
* Max power: 2 kW (3 HP)
* Max Operating Pressure: 12 Bar
* Frequency: 50-60 Hz
* Protection Grade: IP65
* Max Temperature: 65°C
* Minimum Flow Rate-1 LPM

Installation & Set Up: 

The device can be installed directly on the pump or between the pump and the first tap. Make all the electrical connections, check that the pump is correctly primed, open a tap and energize. The green Power on led will light up on the control panel and the pump will start (yellow “Pump on” led on) and will keep running for several seconds to pressurize the system. If this time is insufficient, the device will stop the pump. Press and hold down the Restart button until the red Failure led turns off and the water comes out of the open tap. When the tap is closed, the pump will stop after a few seconds (yellow “Pump on” led turns off). From now on, the device will turn the pump on and off depending on the opening and closing of the tap. In case of water shortage, the device will stop the pump and protect it from dry running. In case of a temporary blackout, the device will automatically rearm once the electricity returns.

Automatic Restart & Anti Jamming Function: 

In case of stopping due to a water shortage, the device will automatically make 10 double attempts to rearm over the 24 hours following the failure, each lasting approximately 5 seconds to allow the pump and the system to reload if possible. The user can try to rearm the device at any time by pressing the Restart button. If for any reason the pump remains idle for 24 consecutive hours, the device will carry out a start-up of the pump motor for about 5 seconds.

Control Panel: 

Green led Power On Device energised
Yellow led Pump On On-Pump running 
FAILURE Red Light Blinking Water Shortage 
RESTART Button  Reset after failure

Protections: 

In case of water shortage, the device stops the pump and protects it from dry running. In case of accidental inversion of a phase on the supply, the device detects the anomaly and automatically maintains the correct direction of rotation of the motor as set and verified during the first installation. In case of a missing phase on the supply, the device recognizes the anomaly and prevents the pump starting from starting.

 

For more information please see WT Brochure (Pages 36-37)

 

Brochure

 

2 Year Warranty 




Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like