TREVOLI - DSK-1 Electronic Pump Controller
The Trevoli automatic elctronic pump controller is designed to work in conjunction with electric pumps. Designed to turn the pump on and off when a tap is opened or closed.
It has a built in restart and will auto restart the pump once every 24 hours. It works to give optimum control of electric pumps used in various applications. Being an intelligent mix of hydraulic and electronic engineering, the controller maintains both pressure and flow and controls the operation of the pump automatically. No adjustment or maintenance is required. It is absolutely dependable, durable and simple to install. Unlike mechanical pressure switches, a pressure tank is not required to operate with the pump, however a pressure tank is still reccomended to assist in long lasting pump application.
* Rated Voltage:220V-240V
* Max Power: 1.5 kW
* Inlet/Outlet: 1"/ 25mm BSP Thread
* Frequency:50 HZ
* Protection Grade:IP65
* Pre-wire with a standard 3 pin plug for the mains and a 3 pin receiver which allows for a 3 pin plug from the pumps motor to connect directly in to the controller.
The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc, the unit recognizes the breakdown and a red LED Failure lights up, at the same time a stop signal is sent to the pump to prevent damage caused by it working in the absence of water. After rectifying the cause of the failure the system to be restarted by pressing the Reset button.
* Domestic Household
* Submerisble High Head Pumps
* Garden and light irrigation
* Tank to tank transfer
2 year warranty