TREVI LOGIC STOP
Electronic plug in device for the protection of pressure switch controlled pumps, or pumps without controls against running dry and over-current situations. Stops the motor and protects the pump in case of a water shortage and over-current.
Motor Current Minimum = 3A
Motor Current Maximum= 8A
Minimum Operating Temperature = 5 deg C
Maximum Operating Temperature = 45 deg C
In order to operate, the electrical power supply of the pump must be connected to the mains.
For this reason the power supply plug of the pump must be inserted in the socket of the device which is in turn connected to the power point (Fig. 1)
In case of a water shortage on suction, the device will stop the pump and protect it against dry running. This malfunctioning is indicated with the red "Failure" Led lit up.
In case of the current absorption exceeding 8 amperes, the device will stop the pump motor and protect it against over-current.
This malfunctioning is indicated with the red "Failure" Led lit up.
To restore normal operation to the device and the system simply press the red "Restart" button.
Two year warranty.
No posts found