DAB Divertron Submersible pressure pump with built in electronic pressure control. Designed to autmatically start and stop the pump when water is used.
The electronics protects the pump against dry running conditions: • Priming cycle: When started, the pump will perform the following operation until it is primed: four priming trials of 30” (motor ON) with pauses of 3” (motor OFF). If there is no water, i.e. if the priming trials fail, the pump will stop for an hour before trying to prime again. If also this trial fails, there will be a 5 hours pause. Afterwards, if the lack of water persists, the pump will try to prime every 24 hours until it has picked up a prime. • Normal Operation: If, during the pumps operation, the water supply is inferior to the minimum delivery for more than 40”, the pump will go into alarm, and start a priming cycle. In this case the priming trials are made after 1, 5, and 24 hours until the pump picks up a prime
Ideal for rainwater systems, sprinklers, and any clear water application requiring high pressure.
Features:
Built-in electronic pressure switch and flow sensor
Equipped with dry-run protection
Built-in non return valve
Easy to use
High reliability
Available with 3 or 4 impellers
Supplied with 10 mt power cord
Available with screen filter or stainless steel ring for use of suction kit
Specifications:
Power: 1100 watts
Max Head: 48 Metres
Max Flow rate: 95lpm.
Impellers: 4
2 Year Warranty
Made in Italy
Categories
Information
![]()
