Cart is empty
"The ultimate choice for use with Gas Caliphonts"
The ideal choice for pressurizing water in a closed system.
The digital controller adjusts water flow as the demand is increased and decreased while maintaining a very smooth flow.
The unique variable flow feature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still
maintain an even flow regardless if one or multiple taps are being used.
When water is demanded (at the faucet, shower etc.) the pressure decreases.
After a slight drop in pressure (below 50 psi) the integrated digital controller automatically soft starts the pump on to maintain the required pressure.
As more water is demanded the controller detects a drop in pressure and automatically increases the motor speed, increasing the flow volume.
As demand is reduced the digital control reduces motor speed until the pressure reaches 50 psi at which point the pump is automatically turned off.
Dimensions 239 mm long x 209 mm wide x 113 mm high
Weight 2 kg/4.5 lbs
Motor WPS 5.0 – 150 W, 12/24V DC
(with built-in thermal protection)
Body Nylon/Polypropylene
Valves Santoprene/EPDM
Diaphragm Santoprene
Pressure and capacity data
(based on water at +20°C/68°F and at full voltage of the motor)
Pressure
BAR KPA PSI Flow l/min
0 0 0 19.4
0.4 40 6.2 18.2
0.8 80 11.6 17
1.2 120 17.4 15.8
1.6 160 23.2 14.7
2 200 29 13.5
2.4 240 34.8 12.2
2.8 280 40.6 11.2
Description Capacity -Pressure Cut Off- Fuze Size - Connection
12 Volt WPS FM 5.0, 19 l/min – 5 GPM 3.5 bar – 50 psi 15 Amp 3/8" BSP / hose ½", ½" BSP / hose ¾"
24 Volt WPS FM 5.0, 19 l/min – 5 GPM 3.5 bar – 50 psi 8 Amp 3/8" BSP / hose ½", ½" BSP / hose ¾"
24 Month warranty - A Johnson Strainer must be used with this pump.
Categories
Information
