CM2-40E - Stainless Steel Multistage Water Pump for Single / Double Storey Home

This pump is ideal for domestic water supply, providing adequate pressure for a small to medium single or double level home supporting up to 6 taps running at one time. Fitted with an electronic automatic constant pressure control system (provides constant pressure at constant flow) Starts automatically when the tap is turned on and Stops automatically when the last tap is turned off,Operating constantly from low flow to full flow 

Gravity fed water supply required

Specs:
Power -550W - .7 Horsepower
Single phase with standard NZ 3 pin plug
Max Flow rate: 60 litres per minute
2900 rpm
Max Pressure:55 psi
Max discharge head: 38 metres
Inlet size: 1 inch BSP (same as 25mm)
Outlet size: 1 inch BSP (same as 25mm)
Built in thermal overload protection
Insulation class F
IP55 Protection
Rated for Continuous duty
Liquid temperature range: -15 - 70 deg C
Max operating pressure: 10 bar
Number of Impellors: 4
Length: 362mm
Height: 210mm
Width: 133mm

Common Applications:
Domestic water supply for small/medium sized homes
General water transfer systems
Industrial/commercial applications

Features:
* Fitted with an electronic automatic constant pressure control system (provides constant pressure at constant flow)
* Starts automatically when the tap is turned on (and pressure drops to 2.2 bar)
* Operates constantly from low flow to full flow
* Stops automatically when the last tap is turned off
* Run Dry Protection
* Corrosion resistant stainless steel construction
* Stainless steel pump housing
* Stainless steel motor shaft
* Stainless steel impellor and intermediate chambers
* Japanese bearings
* Built in thermal overload protection
* Very quiet operation

Performance
This is a Medium pressure Pump - up to 55 PSI, supports up to 6 taps operating at one time. (Based on 10 L/m).
At 28m Head flow rate = 33 litres per minute

2 Year back to base warranty