0800 473 414
9a Lovell Court Albany, Auckland

Showroom hours Monday-Friday 8:30-5:00pm

 

Product filters Product filters

Pump Controllers

$133.00 $95.00 (Including GST)

 Start pressure 1.5 bar or 2.2 bar
 Max Power:1.5KW
  Inlet and outlet 25mm BSP
 Feature: Run dry protection


$56.00 $40.00 (Including GST)

 Start pressure 1.3  bar to 12 bar (20-175 psi)
 Max Current Rated 16a
  Connetcion 6mm female (¼ inch)
 Feature: adjustable differentialIP44 protection (High stop pressure)

+

$133.00 $95.00 (Including GST)

 Start pressure 1.5 bar between 3.5 bar (default setting 1.5 bar)
 Max Current Rated 12a
  Inlet and outlet 25mm BSP
 Feature: fully adjustabe start pressure, run dry protection

 

+

$259.00 $185.00 (Including GST)

 Start pressure 1 to 6 bar Stop Pressure 2 to 10 bar
 Max Current Rated 10a 
  Inlet and outlet 25mm BSP
 Feature: Run dry protection Min-Max differential 1-7 bar, Automatic Restart

+

$48.30 $34.50

 Max Current Rated 4 amp
  Cord Length 5 or 10m
 Feature: For use in water tanks to control a pump to fill or empty the tank.

 


$133.00 $95.00 (Including GST)

 Start pressure 1 bar to 5.5 bar (15-80 psi)
 Max.Power: 2.4kW
  Connetcion 6mm female (¼ inch)
 Feature: adjustable IP54 protection comes with leads and gauge

+

$212.00 $199.00 (Including GST)

 Start pressure variable (.5 - 6 bar)
 Max.Power: 2.2kW
  Inlet and outlet 25mm BSP
 Feature: Run dry protection, auto restart, fully adjustable.

+

$245.00 $175.00 (Including GST)

 Start pressure 1.5 bar
 Max Power:2.2KW
  Inlet and outlet 32mm BSP
 Feature: Run dry protection, 32mm inlet and outlet

+

$230.00 $190.00 (Including GST)

 Start pressure 1.5 Bar or 2.2 Bar
 Max.Power:1.5KW or 2.2KW
  Inlet and outlet 25mm BSP
 Feature: Run Dry Protection, Anti Cycling 


$380.00 $345.00 (Including GST)

 Start pressure 1.5 bar 
 Max.Power:1.5KW
  Inlet and outlet 25mm BSP
 Feature: Adjustable Start pressure 

+

$403.35 $350.75 (Including GST)

 Start pressure 1.5 bar or 2.2 bar
 Max.Power:1.5KW
  Inlet and outlet 25mm BSP
 Feature: Run dry protection


$1,030.00 $850.00 (Including GST)

BEDFORD Variable Speed Drive Controller 
Enhance the performance of single phase and three phase water pumps up to 7.5 kW.


$241.00 $138.00 (Including GST)

Bedford Transducer 

 

+

$90.00 $50.00 (Including GST)

 Start pressure .8 bar or 6 bar
 Max.Power 1.5KW (230v) or 3kW (400v)
  Connetcion 6mm female (¼ inch)
 Feature: Adjustable Differential

+

$98.00 $55.00 (Including GST)

 Start pressure 1.3 bar or 12 bar
 Max.Power 1.5KW (230v) or 3kW (400v)
  Connetcion 6mm female (¼ inch)
 Feature: Adjustable Differential

+

$168.00 $150.00 (Including GST)

Electronic plug in device for the protection of pressure switch controlled pumps, or pumps without controls against running dry and over-current.

+

$202.40 $135.00 (Including GST)

 Start pressure 1.5 bar or 2.2 bar
 Max.Power:1.5KW
  Inlet and outlet 25mm BSP
 Feature: Run dry protection


$245.00 $195.00 (Including GST)

1 x Telemecanique Pressure switch, adjustable between 1 and 6 Bar 
1 x 5 way Brass Tee
1 x Pressure Gauge
1 x 1" Non Return Valve and Nipple
Complete with Plug & Play Leads

+

$782.60 $559.00 (Including GST)
This pump controller can control one or two single or three phase pumps and has three different modes which can be changed easily by a switch setting. Each mode allows the controller to be used for different functions.

Mode 1: Used to supply water to a tank using float switches (not supplied) or liquid level sensors (supplied).
Mode 2: Used for pressure boosting using a pressure switch (not supplied) and pressure tank (not supplied).
Mode 3: Used to empty a tank or sump using float switches (not supplied) or liquid level sensors (supplied).

Comes with a remote monitor which allows monitoring and controlling the pump from up to 1200m distance from the controller.

$978.60 $699.00 (Including GST)
This pump controller can control one or two single or three phase pumps. 

It features a level transmitter which removes the need for float switches and level sensors. The level transmitter is attached to the top end of a pipe inside the sewage tank. As the liquid level rises, the pressure inside the pipe increases - this pressure change allows the controller to know the liquid level. This removes the need for regular cleaning and checking of float switches and level sensors.

Comes with a remote monitor which allows monitoring and controlling the pump from up to 1200m distance from the controller.